Need help?Do you have a question about the WAGNER ProSpray 34 and is the answer not in the manual?
General| Power | 1300 W |
|---|---|
| Max Pressure | 221 bar |
| Hose Length | 15 m |
| Power Source | Electric |
| Material Container | 5 l |
| Voltage | 230 V |
| Frequency | 50 Hz |
Describes the severe risk of high-pressure injection injuries from spraying.
Covers flash points, explosion risks, spray jet hazards, and recoil.
Addresses respiratory protection, occupational health, operating pressure, and hose safety.
Covers earthing, electrostatic charging, and unit setup for safe operation.
Details types of paints and materials suitable for spraying with the unit.
Identifies key parts of the spraying unit via a labeled diagram.
Covers moving the unit and connecting hoses and spray gun.
Explains the meaning of indicator lights and their operational states.
Details the pressure zones and their operational significance.
Describes connecting to power and initial priming with cleaning agent.
Guides the process of filling the unit with the actual coating material.
Details access and use of various system menus for customization.
Covers spraying movement, pressure adjustment, and hose care.
Covers pausing work, unit shutdown, and cleaning procedures.
Details cleaning of suction, high-pressure filters, and the unit exterior.
Explains how to clean the spray gun and its internal intake filter.
Lists common problems like no start, no suction, and pressure issues.
Addresses issues like pulsation, poor pattern, and loss of unit power.
Lists and explains specific error codes displayed by the ESC system.
Covers annual checks and visual inspection of hoses for wear.
Provides step-by-step instructions for repairing the relief valve.
Details the process for repairing the inlet and outlet valves.
Explains how to replace the unit's packings.
Continues the procedure for installing packings and drive assembly components.
Illustrates the electrical connections for different voltage configurations.
Lists optional accessories for the unit.
Lists replacement parts for the main assembly.
Provides a detailed list of parts for the drive assembly.
Lists spare parts for the fluid section, filter assembly, and upright cart.
Guides users on choosing and caring for spray tips.
Presents a comprehensive table for selecting the correct spray tip.
Outlines the manufacturer's responsibilities and limitations.
Details the warranty coverage, duration, and exclusions.
States compliance with relevant European directives and standards.
To Next Page