Need help?Do you have a question about the WAGNER ProSpray 3.25 and is the answer not in the manual?
General| Power | 1.3 kW |
|---|---|
| Max Pressure | 221 bar |
| Max Flow Rate | 2.6 L/min |
| Hose Length | 15 m |
| Power Source | Electric |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Tip Size | 0.021 inches |
Explains various safety symbols used in the manual for hazard identification and warnings.
Details essential safety measures related to electrical connections and grounding for the unit.
Covers risks of sparks and flames due to electrostatic charge and prevention methods.
Outlines suitable materials and object sizes for the sprayer's application.
Discusses types of materials, viscosity, filtering, and two-component coatings.
Describes the airless spraying method, its advantages, and technical principles.
Explains the technical construction and operation of the Wagner PS 3.25 unit.
Provides detailed specifications including voltage, pressure, flow rate, weight, and dimensions.
Details the legend and visual representation of unit components and their numbering.
Instructions for moving and transporting the unit, both manually and in a vehicle.
Steps for connecting the high-pressure hose, spray gun, and handling separating oil.
Describes the function of service and pressure indicator lights and their meanings.
Explains how to adjust the pressure control knob for minimum, black zone, and cleaning.
Guidelines for safely connecting the unit to the mains power supply.
Steps for cleaning the preserving agent from the unit before initial use.
Procedure for preparing and starting operation with paint or coating material.
Details the functionality, screens, and operation of the DESC system.
Instructions for cleaning the unit's exterior and high-pressure hose.
Details on cleaning or replacing the suction filter for optimal performance.
Steps for removing, cleaning, and reinstalling the high-pressure filter.
Procedure for cleaning the airless spray gun, including its intake filter.
Guidelines for annual servicing by WAGNER service and component checks.
Visual inspection of the high-pressure hose for damage and wear, including replacement advice.
Procedure for replacing the valve housing of the relief valve, emphasizing replacement over repair.
Detailed steps for removing, cleaning, and reassembling the inlet and outlet valves.
Instructions for removing, lubricating, and installing new packings for the pump.
Wiring diagram illustrating the electrical connections of the PS 3.25 unit.
Lists common error messages from the DESC system and recommended actions or service.
Guidance on selecting the correct spray tip based on material and desired spray pattern.
Instructions for maintaining and cleaning airless hard-metal spray tips.
Details on various spray gun accessories like flat jet tips and extensions with order numbers.
Comprehensive table listing tips, spray angles, bore sizes, applications, and order numbers.
Information on the TempSpray system for heating paint materials and its advantages.
Description of the Pump-Runner accessory for cleaning, transport, and preservation of pump units.
Visual representation of various accessories available for the sprayer with numbered parts.
Exploded view of the main unit components with corresponding part numbers.
Detailed diagram of the fluid section components with part numbers and descriptions.
Exploded view of the drive assembly components with their respective part numbers.
Diagram of the stand components with part numbers for assembly and identification.
Illustration of the suction system for the stand, showing hoses and filters with part numbers.
Diagram detailing the components of the upright cart assembly with associated part numbers.
To Next Page
