Need help?Do you have a question about the WAGNER ProSpray 3.34 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Type | Airless |
| Max Pressure | 3300 psi |
| Max. pressure | 3300 psi |
| Flow Rate | 4.3 l/min |
| Max. delivery rate | 4.3 l/min |
Key warnings and general safety instructions for operating the unit, focusing on injection risks.
Essential steps before starting operation and procedures for safely pausing or stopping work.
Explains hazard symbols and detailed safety measures against injection injuries.
Covers risks associated with high-pressure hoses, flammable materials, and hazardous vapors.
Guidelines for safe electrical connections, grounding, and maintenance.
Addresses risks from hazardous vapors and electrostatic charging.
Details suitable materials, applications, and viscosity considerations.
Explains the principle and advantages of the airless spraying method.
Visual representation of unit parts with a detailed legend for identification.
Lists technical data, transportation guidelines, and initial setup steps.
Explains the function of indicators, pressure control, and DESC interface.
Guidelines for connecting the unit to the power supply.
Procedures for priming and operating with coating materials.
Introduction to the DESC system, its display, and function keys.
Details screens for tracking volume, job time, and service intervals.
Covers setting a security code and using Prime/Rapid Clean modes.
Best practices for achieving an even spray pattern and proper technique.
Guidelines for safe use, maintenance, and age-related replacement of the hose.
Steps to safely pause or stop operation, including pressure release.
Instructions for cleaning the unit's exterior and the high-pressure filter.
Procedures for cleaning the spray gun and its intake filter.
Solutions for issues like no start, material draw, or pressure loss.
Addresses problems with material delivery and spray quality.
Explains error messages from the DESC system and necessary actions.
Covers annual servicing, hose checks, and repairs for relief/inlet/outlet valves.
Step-by-step guide for replacing unit packings.
Visual guide to the unit's electrical connections and components.
Covers tip selection, maintenance, accessory catalog, and the detailed airless tip table.
Information and use cases for the Pump-Runner accessory.
Lists contact details for Wagner service centers worldwide.
Diagrams illustrating various accessories available for the unit.
Comprehensive list of part numbers and descriptions for accessories.
Illustrated breakdown of the main unit assembly with corresponding part numbers and descriptions.
Illustrated breakdown of the fluid section with corresponding part numbers and descriptions.
Illustrated breakdown of the drive assembly with corresponding part numbers and descriptions.
Illustrated breakdown of the filter assembly with corresponding part numbers.
Illustrated breakdown of the suction system for the low boy cart with part numbers.
Illustrated breakdown of the upright cart assembly with part numbers.
Illustrated breakdown of the low boy cart assembly with part numbers.
Details the scope, conditions, exclusions, and handling of guarantee claims.
Information on product disposal and company contact details.
To Next Page