Need help?Do you have a question about the WAGNER ProSpray 3.39 and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Hose Length | 15 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Source | Electric |
| Nozzle Size | 0.013 - 0.021 inches |
| Max. tip size | 0.021 inches |
Explains symbols indicating potential hazards and important information.
Details risks associated with high-pressure hoses and prevention measures.
Warns about flammable vapors and ignition sources.
Highlights the danger of injection injuries from high-pressure spray.
Details suitable materials and object sizes for different applications.
Discusses processible coating materials, filtering, and viscosity.
Explains the airless spraying technology and its advantages.
Provides a technical description of how the unit operates.
Lists and explains the components shown in the diagram.
Visual representation of the ProSpray unit with numbered parts.
Lists specifications like voltage, pressure, flow rate, and weight.
Instructions for moving and transporting the unit.
Guidance on setting up for paint spraying.
Specific instructions for setting up for textured materials.
Steps for connecting hoses and the spray gun, and filling oil.
Explains the meaning of different indicators on the control panel.
Describes the different settings of the pressure control knob.
Safety instructions for connecting the unit to power.
Steps for flushing the unit with cleaning agent before first use.
Step-by-step guide to starting operation with paint.
Details the functionality and menu screens of the DESC system.
Explains how to set and manage a security code for the sprayer.
Describes the screen displayed when the pressure control knob is at MIN.
Describes the screen for the Rapid Clean function.
Provides guidelines for achieving an even coating.
Safety and handling instructions for the high-pressure hose.
Detailed steps for cleaning the unit after use.
Instructions for cleaning the exterior of the unit.
How to clean the high-pressure filter to maintain performance.
Steps for cleaning the spray gun and its components.
Procedure for cleaning the inlet screen in the foot valve.
Troubleshooting steps for when the unit fails to start.
Troubleshooting steps for material intake problems.
Troubleshooting steps for low pressure issues.
Troubleshooting for material leaks from the fluid section.
Troubleshooting for uneven spray output.
Troubleshooting steps for irregular spray patterns.
Troubleshooting steps for power loss.
Recommendations for annual servicing by WAGNER.
Inspection guidelines for the high-pressure hose.
Detailed steps for repairing or replacing the relief valve.
Steps for disassembling and servicing inlet/outlet valves.
Detailed procedure for replacing packings in the fluid section.
Electrical schematic showing connections for the unit.
Guidance on choosing the correct spray tip for different applications.
Instructions for maintaining spray tips.
Lists and describes available spray gun accessories.
Comprehensive table of tips, spray angles, bore sizes, and applications.
Additional data for tip selection across various applications.
Information on an accessory for cleaning and transportation.
To Next Page