To Next PageTo Next Page
Need help?Do you have a question about the WAGNER HC950 and is the answer not in the manual?
General| Brand | WAGNER |
|---|---|
| Model | HC950 |
| Category | Pressure Washer |
| Language | English |
Details critical safety warnings regarding injection hazards and essential operational steps before starting.
Key points to observe before operating the unit, including checks for faults and leaks.
Rules to follow before starting work or during breaks, focusing on pressure release and unit shutdown.
Explains hazard symbols and provides safety guidelines for high-pressure hoses.
Outlines risks associated with flammable materials and high-pressure injection injuries.
Addresses electrical safety, hazardous vapor precautions, and general operational safety rules.
Covers safety for gasoline engines and proper unit setup on uneven surfaces.
Details primary applications, examples, and compatible coating materials for the units.
Explains the Airless spraying technology and the basic functioning of the unit.
Identifies components and provides illustrations for gasoline-powered HC units.
Identifies components and provides illustrations for electric HC units.
Presents detailed specifications for gasoline-powered HC models.
Presents detailed specifications for electric HC models.
Guidelines for operating temperature, humidity, altitude, and safe transportation and storage.
Instructions for moving the unit in a vehicle or via crane.
Steps for adjusting the material feed pump position for transport and operation.
Connect hoses, guns, setup gasoline engine, connect electric units, and flush preserving fluid.
Procedures for operating with materials, spraying techniques, hose handling, and work interruptions.
Instructions for cleaning the unit exterior and the high-pressure filter.
Steps for cleaning the airless spray gun and its intake filter.
Addresses common problems and solutions for gasoline engines and electric motors.
Troubleshooting guide for issues related to the hydraulic motor.
Identifies and resolves common malfunctions of the material feed pump.
Outlines general annual servicing and daily/regular checks of the hydraulic oil level.
Procedures for oil/filter changes and inspection of high-pressure hoses.
Guidance on choosing and maintaining airless hard-metal spray tips.
Lists and describes available accessories for spray guns, such as tips and extensions.
Detailed table listing tip markings, spray angles, bore sizes, and applications for various paints.
Information on the WAGNER 2Speed Tip system, including a tip table for different materials.
Details warranty coverage, registration requirements, exclusions, and terms for professional finishing.
Guidelines for the proper and environmentally sound disposal of the product.
