WAGNER HC950 - Spray Gun Cleaning

 
GB
Cleaning the unit (shutting down)
1
2
3
4
5
6
7
8
8.3 Cleaning Airless spray gun
– Rinse Airless spray gun with an appropriate cleaning agent.
– Clean tip thoroughly with appropriate cleaning agent so that
no coating material residue remains.
  
Intake lter in Airless spray gun (g. 16)
Dismounting
1. Pull protective guard (1) forward vigorously.
2. Screw handle (2) out of the gun housing. Remove intake lter
(3).
3. Intake lter congested or defective – replace.
Mounting
1. Place intake lter (3) with the long cone into the gun housing.
2. Screw handle (2) into the gun housing and tight en.
3. Snap in protective guard (1).
1
2
3