WAGNER PROCOAT 850 User Manual

Owner's I
Read this manual for complete instructions
Fran_ais (page 25) / Espa_oi (pagina 49)
Contents
2 Important Safety Information
4 What's in the Box?
5 Assembly
6 Proper Use and Functions
7 Pressure Relief Procedure
8 Load Material
9 Getting Material to Flow
10 Practice Spraying
12 Clear the Spray Tip
13 Clean the Spray Gun Filter
14 Clean the Inlet Filter
15 Short Term Storage
16 Cleanup - latex materials
18 Cleanup - oil-based materials
19 Cleaning the Spray Gun Components
20 Long-Term Storage
21 Replacing the Outlet/Inlet Valves
22 Troubleshooting
72 Parts List
76 Warranty
1009• Form No. 0504949C Patent pending
Espa_ol

WAGNER PROCOAT 850 Specifications

General

Flow rate	360 l/h
Type	Electric
Max. Working Pressure	1450 PSI
Hose Length	5 m
Power Source	Electric
Max Pressure	1450 PSI
Motor Power	1.6 kW
Spray Gun	Included

Summary

Important Safety Information

Injection Injury Hazard

High pressure fluid can pierce skin, causing serious injury or amputation.

Hazardous Vapors

Inhaling paint/solvent vapors can cause nausea, fainting, or poisoning.

Explosion or Fire Hazard

Flammable vapors can explode or ignite, leading to damage or severe injury.

Incompatible Materials Hazard

Certain materials (e.g., bleach) are incompatible with aluminum, posing explosion risks.

General Safety and Electrical Precautions

General Safety Guidelines

Important Electrical Information

Grounding Instructions

Assembly

Proper Use and Functions

Controls and Functions Overview

Pressure Relief Procedure

Load Material

Getting Material to Flow

Practice Spraying

Spray Technique

Troubleshooting: Clear the Spray Tip

Troubleshooting: Clean the Spray Gun Filter

Troubleshooting: Clean the Inlet Filter

Cleanup

Latex Material Cleanup Steps

Cleanup Continuation

Latex Material Cleanup Steps (cont.)

Oil-Based Material Cleanup

Cleaning the Spray Gun Components

Replacing Outlet Valve

Cleaning or Replacing Inlet Valve

Troubleshooting

Sprayer Does Not Start

Lists causes and solutions for the sprayer failing to start.

No Material Draw on PRIME

Lists causes and solutions for the sprayer not drawing material when priming.

Poor Spray Pattern (Pressure Drop)

Lists causes and solutions for pressure drops and bad spray patterns.

Flow Through Material Return Tube

Lists causes and solutions for material flowing through the return tube instead of the gun.

Spray Gun and Tip Leaks

Spray Gun Leaks

Causes and solutions for leaks from the spray gun body.

Spray Tip Assembly Leaks

Spraying Performance Issues

Gun Will Not Spray

Poor Spray Pattern (Tailing)