Heat Gun Model HT3500
English
8 © 2004 Wagner Spray Tech. All rights reserved.
CLEANING AND MAINTENANCE
Keep the intake openings on the housing clean and free of obstructions. Use a soft, dry brush
to clean the openings periodically. Use only mild soap and a damp cloth to clean the heat gun.
Many household cleaners contain chemicals which could seriously damage the housing.
Do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products when cleaning the heat gun. Never allow any liquid to get inside the tool or
immerse any part of the tool into a liquid.
STORAGE
Allow the heat gun nozzle to cool to room temperature before placing in storage.
The nozzle will turn dark over time because of the high heat. This is normal and will not
affect the performance or life of the unit.
ACCESSORIES
The following accessories may come with the gun or may be purchased separately by
calling 1-800-727-4023.
Nozzle Kit P/N 0503148
Concentrator Nozzle Flare Nozzle Glass Protector
Always use gloves when handling the heat gun. Use of
nozzle accessories will produce hotter gun temperatures
which may result in decreased durability of the gun.
To attach an optional item to the gun:
1. Set the heat gun upright on a level surface until the tip is cool.
2. Set the item onto the tip of the heat gun and push firmly into
place by hand.
To remove an optional item:
1. Set the heat gun upright on a level surface until the tip is cool.
2.
Pull the item off of the tip.
To Next Page
Loading...
Need help?
General
