WAGNER smart roller User Manual (English)

Other manuals for WAGNER smart roller

Questions and Answers:

E
Erik CainJul 26, 2025
What to do if there is leakage on the roller arm assembly of my WAGNER Power Tool?
- S
  shawn04Jul 26, 2025
  Leakage on the roller arm assembly of your WAGNER Power Tool can occur due to several reasons: * The roller arm seal might be backwards: Turn the seal around. * The roller arm seal was not properly cleaned: Clean and properly lubricate it. * The O-ring and connecting areas on the roller arm weren't cleaned properly: Clean and properly lubricate. * Residue on the connecting area inside the head: Clean out any remaining residue inside the head. * The O-ring on the roller arm is damaged or missing: Clean or replace it. * The roller cover is worn or damaged: Replace the roller cover. * The roller core or cap is worn or damaged: Replace the roller core or cap.
C
Charles MillerAug 5, 2025
Why is there leakage on the roller arm assembly of my WAGNER smart roller Power Tool?
- K
  Karen JohnsonAug 5, 2025
  Leakage on the roller arm assembly of your WAGNER Power Tool can occur for several reasons. It might be due to a backwards roller arm seal (turn the seal around), an improperly cleaned roller arm seal (clean and properly lubricate it), or residue on the connecting area inside the head (clean out any remaining residue). Also, check if the O-ring and connecting areas on the roller arm were not cleaned properly (clean and properly lubricate), or if the O-ring is damaged or missing (clean or replace it). The roller cover, core, or cap might be worn or damaged (replace them).
D
Denise GuzmanAug 15, 2025
How to fix a WAGNER smart roller plunger that is difficult to pull/push?
- T
  Terry RamirezAug 15, 2025
  If the plunger on your WAGNER Power Tool is difficult to pull or push, the plunger O-rings may not be lubricated. Lubricate the plunger O-rings.