3
T 25 K
GB
What materials can be used?
The continuous mixer T 25 K has been designed for use with
materials in sacks. It is suitable for universal mixing of the fol-
lowing coating materials which have been premixed by the
manufacturer:
Mineral adhesives
•
Building adhesives
•
Mineral texture plaster up to grain size 5 mm
•
Lime cement plaster
•
Cement plaster
•
Indoor lime plaster
•
Renovating plaster
•
Fine concrete
•
Flow ooring plaster
•
Only use other coating materials in consultation with WAGNER
Application Technology Department.
Technical data Continuous mixer T 25 K
Motor output P1: 2.2 kW
Voltage: 230 V ~, 50 Hz
Fuse protection: 16 A
Mains cable: 3 x 1.5 mm², 3 m
Mixing amounts: 20 l/min
Noise level: 70 dB (A)
Water connection: Claw coupling for DN 13mm
(1/2 inch) water hose
Water pressure from supply
line:
at least 3 bar
Container contents: 60 l
Measurements L x W x H:
Operating position:
Transport position:
1630 x 750 x 1040 mm
1210 x 750 x 600 mm
Weight: 105 kg
Tire pressure, max.: 2 bar
1 0 2
Autom. Aus Hand
13
14
3
1 2
4
5
17
67
8
9
10
11
12
15
16
18
7 Coating material output
8 Clamping lock for mixing pipe
9 Attachment for water ow display
(accessory)
10 Water connection, external
11 Ball valves (2) for emtying water
12 Pressure reducer solenoid valve
13 Fine control valve
14 Overcurrent protection switch
15 ON/OFF motor protection switch
16 Changeover switch for system:
attachable container (accessory)
big bag / silo (accessory)
17 Mains cable
18 socket for sensor control
system S 230 (accessory)
1 Transport shaft
2 Protective grid with sack opener
3 Water connection for mixing pipe
4 Swiveling device for mixing pipe
5 Mixing pipe with mixing shaft
6 Spring pin for fastening the mixing shaft
Equipment overview
To Next Page
Loading...