Selecting the proper tip – cont.
Round tips
The round tip produces a round pattern. Use a round tip if the surface you are
spraying is too small for use with the wide angle tip.
The round tip comes in 3 sizes. Use the size that works best for the type of
material you are spraying.
1. Light materials - .023 inch (0.6mm) opening. This size works best for
oil-based materials.
2. Medium materials - .031 inch (0.8mm) opening. This all-purpose size
works best for most materials.
3. Heavy materials - .039 inch (1.0mm) opening. This size works best
for hard to spray, coarse materials.
To Next Page
Loading...
