Long term clean up
Long-term cleanup
Cleaning the container: If you used the 940ml container:
1. Unplug the sprayer.
2. Pour the remaining material back into the original container.
3. Fill the 800 ml container half full of solvent appropriate to the type of material
sprayed.
Tip: For water-based paints, use warm, soapy water, or 30ml of
Cleaner/Lubricant (P/N 0154570) mixed with water. For any other
material, use the type of solvent recommended by the material
manufacturer on the original container.
4. Plug in the sprayer.
5. Squeeze the trigger until the solvent comes through the sprayer for several
seconds.
6. Unplug the sprayer.
7. Remove the container and properly dispose of the remaining solvent.
To Next Page
Loading...
