Using the suction extension – cont.
5. Slide the intake hose (the hose with the writing on it) through the container
clip. You may need to pull the hoses slightly apart.
6. Press the suction set hose adapter onto the suction set.
7. Push the intake hose onto the suction set assembly. Make certain that the
intake filter is in place on the suction set.
8. Submerge the suction set assembly into the material container and attach the
container clip to the side to hold it securely. Make certain that the return line
is inside the container.
To Next Page
Loading...
Need help?
General
