WAGNER W140P - Safety Instructions for Spray Guns; Materials to be Used

GB
6
Attention! When using power tools, the following basic safety measures are to be
taken as protection against electric shock, personal injury and risk of fire:
Read and observe these instructions before using the equipment.
Safety Instructions for Spray Guns
● Spray materials emerge from nozzle tips under high pressure. Attention! Danger
of injection - Never point the spray stream towards human beings or animals.
● The spray gun is to be used only for paints and solvents with a 21° C (32° in UK)
flashpoint or higher (See information on the material tin. Hazard class A II and A III
permitted).
● The spray gun is not to be used in work places covered by Ex-protection
regulations.
● To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
● No sources of ignition are to be in the immediate area when spraying, e.g. open
flame, cigarettes, sparks, glowing wires and hot surfaces.
● Before carrying out any work on the spray gun, unplug the lead from the power
socket.
● Do not use spray guns to spray flammable liquids.
● The spray guns are not to be cleaned with flammable solvents which have a
flashpoint under 21°C.
● Take precautionary measures against potential hazards from the spray liquid and
follow any instructions given on containers or laid down by the manufacturer of the
liquid.
● Do not spray any liquid of unknown hazard potential.
● Wear a breathing mask and ear protection.
Materials to be used:
Paints and varnishes containing solvents, acrylic enamel paints, water-soluble
varnishes, glazes, polishes, wood preservatives, disinfectants, plant protectives,
saturants, as well as oils and other watery liquids.
Spray gun W 140 P
Technical Data W 140 P
Max. delivery ratee 220 g/min Container capacity: 800 ml
Max. viscosity (runout time) 70 sec. Double insulation:
Pump: Replaceable
Max.
pressure spikes: 130 bar Pump cylinder: Special steel
Power source: 230 V, 50 hz Piston: Special steel Ø 5 mm
Power consumption: 100 W Oscillation level: 10,5 m/s²
Round spray nozzle: 0,8 mm Sound pressure level: 86 dB(A)
Weight: 1,5 kg Sound pressure output: 99 dB(A)