Need help?Do you have a question about the WAGO 750-370 and is the answer not in the manual?
General| Number of Inputs | 8 |
|---|---|
| Input Voltage | 24 V DC |
| Width | 12 mm |
| Height | 100 mm |
| Fieldbus | PROFIBUS DP |
| Number of I/O modules | 1 |
| Relative humidity | 95 % (non-condensing) |
| Isolation | 500 V AC |
| Storage temperature | -40 to +85 °C |
Provides critical safety notes for device installation and operation.
Details mechanical, electrical, and environmental specifications for the system.
Explains system and field supply, isolation, and connection details.
Introduces the PROFINET IO 750-370 coupler and its hardware components.
Explains how to configure I/O modules using GSD files and specific settings.
Explains how to set parameters using record data sets and substitute values.
Details diagnostics data sets, structures, and fault types.
Explains LED indicators, blink codes, fieldbus status, and error messages.
Explains configuration and parameter settings for digital, analog, and specialty I/O modules.
Outlines installation regulations for explosive environments in Germany and North America.
To Next Page
