EasyManua.ls Logo

Wahl Manscaper - Operating Instructions; Recharging Procedure

Wahl Manscaper
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
MANSCAPER
TM
TRIMMER
OPERATING INSTRUCTIONS
RECHARGING
The trimmer cannot be overcharged, so you may charge it
as often as desired. However, periodic recharging of the trimmer,
rather than continuous recharging, will prolong battery life.
1. All 4 LEDs light up when the unit is powered on and fully
charged. These LED’s are also battery level indicators
and gradually turn o󰀨 based o󰀨 the charge level.
2. The bottom LED lights up when there is a low battery
(less than 25% power). If lower than 10% battery life,
the bottom LED ashes.
3. When charging the unit, the LEDs light up to show the charge
level. All 4 LEDs will be lit when the unit is fully charged.
4. This trimmer is conveniently designed for household use.
It should be allowed to charge for 60 minutes before rst use.
5. Remove the trimmer, USB cable and accessories from the
packing material.
6. Connect the USB cable to the trimmer.
7. Plug in the USB: to a certied device such as on a computer,
receptacle, lamp, class 2 power supply or automotive adapter.
8. Warning: Never use an unapproved USB source.
9. When trimmer is low in power, it should charge to assure
maximum power is available
when it is next used.
This trimmer is designed to
completely charge the battery
without overcharging. Do not use
the trimmer while it is charging.
10. Only use the USB cable
supplied by the manufacturer
with this trimmer.

Other manuals for Wahl Manscaper

Related product manuals