Walchem W100 Quick Programming

W100 Programming
Programming the W100 controllers
The W100 controller is menu-driven programming, with 4 major icons.
Theses icons appear on the Home screen from left to right:
Alarm Menu
Inputs Menu (Direct sensors, analog, digital inputs)
Outputs Menu (Relays)
Configurations menu
Press the key below the icon to get to the main menu selections. The UP Arrow will get you to the
Inputs Menu; The DOWN Arrow will get you to the Relays Menu.
Pressing the HOME (bottom) button at any time will return you to the page above.

Walchem W100 Specifications

General

Model	W100
Type	Controller
Display	LCD
Input Type	Analog/Digital
Inputs	4
Outputs	4
Analog Outputs	2
Analog Inputs	2
Digital Inputs	2
Power Consumption	10 W
Communication Protocol	Modbus RTU
Communication	RS-485
Weight	1.5 kg
Output Type	Analog
Power Supply	100-240 VAC
Enclosure	IP65
Storage Temperature	-20 to 70 °C
Humidity	0 to 95%
Dimensions	144 x 144 mm