8
For the appliance to function properly, the following conditions must be maintained.
All utilities (gas, electric, water and steam) must be OFF to all equipment and locked out of operation ac-
cording to national/regional regulations, as well as company approved practices during installation,
maintenance and servicing. Always allow appliance to cool.
Use appropriate safety equipment during installation, maintenance and servicing.
To avoid cardiac pacemaker malfunction, consult your physician or pacemaker manufacturer about effects
of electromagnetic field on your pacemaker.
Replace defective power cables immediately by an authorized service agency.
Markings and warning labels mounted directly on the equipment must be observed at all times and kept in
a fully legible condition.
Risk of burns from high temperatures. You may get burnt if you touch any of the parts during operation.
Surfaces close to the cooking area including side panels may get hot enough to burn skin. Use extreme
caution to avoid coming in contact with hot surfaces or hot grease. Wear personal protective equipment.
Maximum Tolerance of the Nominal Supply Voltage +6 /-10 %
Supply frequency 50/60 Hz
Minimal Diameter of Induction Pan
12 cm
[5”]
Maximum Ambient temperature in operation
+5°C to +40°C
[+41°F to +104°F]
Maximum Relative Humidity in operation 30% to 90%
To Next Page
Loading...
Need help?
General
