Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E User Manual

31
Boil Test
To test the quality of a pan for induction cooking, perform a boil test.
(Test for 3.5kW or 5.0kW Induction Coil)
Perform a boil test to verify the performance of a pan for induction cooking.
Add one litre of cold water into the pan (op-timal when use pan with bottom diameter of 24cm) and
bring it to boil.
Compare the total boil time to the guideline below:
• 3.5kW Coil, approx. 140 seconds
• 5.0kW Coil, approx. 85 seconds
If time to boil exceeds the above guideline, then the pan is not suitable for achieving optimal
efficiency.
Please contact your supplier to purchase suitable induction pans.
If the induction appliance does not function as expected despite using quality induction pans, refer to
the troubleshooting charts.
Avoiding dangers in case of accidents or malfunctions
To avoid hazards in the event of a malfunction or accident related to the device, proceed as follows.
1. Disconnect the power supply from the circuit breaker provided for the device.
2. Disconnect the mains plug of the affected device to prevent it from being switched on again.
If the plug is not safely accessible, the device must be switched off at the main circuit breaker.

Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E Specifications

General

Brand	Waldorf
Model	IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E
Category	Cooktop
Language	English