Need help?Do you have a question about the Walfront JDSW43R and is the answer not in the manual?
Guide to installing the Mach3 software on your computer.
Instructions for applying the software license file for Mach3.
Steps for installing the motion card's software and plug-in.
Configuring X, Y, Z, A axes in Mach3 via Ports and Pins.
Setting up motor tuning parameters for optimal performance in Mach3.
Configuring homing and limit switches in Mach3's dialog.
Configuring the general-purpose input signals for various functions.
Configuring the general-purpose output signals for controlling external devices.
Setting up the 0-10V output for spindle speed control.
Setting driver current for optimal torque and performance.
Configuring microstep subdivision for stepper motor resolution.
Adjusting decay settings for stepper motor driver performance.
Diagram showing how to connect sensors to the motion card.
Diagram illustrating connections for output channels.
Diagram showing how to connect an inverter to the motion card.
Diagram detailing the power supply connections for the motion card.
To Next Page
General