Need help?Do you have a question about the Walker Edison BR2DSLNS and is the answer not in the manual?
General| Brand | Walker Edison |
|---|---|
| Model | BR2DSLNS |
| Category | Indoor Furnishing |
| Language | English |
Ensure all parts and hardware are available before beginning assembly.
Follow each step carefully to ensure the proper assembly of this product.
Two people are recommended for ease in the assembly of this product.
The three main types of hardware used are wood dowels, screws, and bolts.
Use provided glue to secure wood dowels by placing a small amount in the hole.
A Phillips head screwdriver is required for the assembly of this product.
Power tools should not be used to assemble this product.
Provides guidance on applying wax to wooden guide rails for smooth drawer gliding.
Insert wood dowels (A) and (B) with glue into specified parts.
Use screw (E) to attach parts (2, 3) to part (4).
Use screw (D) to attach parts (5) and (6) to part (8).
Secure legs to the body using bolt (G) and hex key (H), and screws (E).
Attach part (1) to the body using screw (D).
Attach back panel (7) to the body using nails (F).
Use screw (C) to attach parts (9) to parts (2, 3).
Insert wood dowel (B) into the front hole in the drawer rail (9).
Attach drawer sides (11, 12) to bottom (15), insert panel (13), secure back (14).
Attach drawer sides (11, 12) to bottom (10), insert panel (13), secure back (14).
Insert wood dowel (B) into drawers and place drawers into the unit.
To Next Page