Need help?Do you have a question about the Wallbe Eco 2.0 Series and is the answer not in the manual?
General| Housing Material | Plastic |
|---|---|
| IP Rating | IP54 |
| Charging Modes | Mode 3 |
| Ingress Protection | IP54 |
| Charging Power | 11 kW |
| Charging Current | 16 A |
| Connector Type | Type 2 |
| Input Voltage | 230 V AC |
| Protection | Overcurrent, Overvoltage, Short Circuit, Overheating |
| Mounting | Wall-mounted |
| Operating Temperature | -25°C to +40°C |
| Output Voltage | 230 V AC |
| Output Current | 16 A |
| Power Output | 11 kW |
Details on handling by children, disposal, and periodic inspections.
Specifies requirements for LS-switch, RCD, and overvoltage protection.
Details on connecting the supply line, including pre-cut holes and wiring diagrams.
Provides wiring terminal information for connecting the charging cable by model.
Instructions for starting and stopping the charging process.
How to authorize charging using the device's ON/OFF button.
How to authorize charging using the integrated key switch.
How to authorize charging using an RFID card.
Troubleshooting steps for common charging errors like no start or interruptions.
Contact information for technical support via phone, email, and fax.
Details on the 2-year manufacturer warranty and claim procedure.
Link and password to download additional manuals.
To Next Page
