Need help?Do you have a question about the Wallbox Copper SB and is the answer not in the manual?
General| Product type | Charging adapter |
|---|---|
| Suitable for | Indoor & outdoor |
| Product color | Black |
| Wall mountable | Yes |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 113 mm |
|---|---|
| Width | 192 mm |
| Height | 260 mm |
| Weight | 2000 g |
Specifies the number of primary chargers, excluding Pulsar and Quasar models.
Defines the range for secondary chargers supported.
Indicates the number of compatible energy meters.
Specifies the communication protocol used between chargers.
Defines the protocol for communication between the primary charger and power meter.
Sets the maximum total length for the charging network.
Specifies the maximum cable length between the primary charger and the energy meter.
Indicates the number of chargers that can terminate a chain.
Defines the configurable maximum phase current for the network.
Sets the configurable maximum current for the electrical installation.
Lists the different Wallbox device models available for installation.
Details the necessary tools required for installation procedures.
Details for the EM 112 energy meter model.
Details for the EM 330 energy meter model.
Details for the EM 340 energy meter model.
Input the total number of chargers, including the primary charger.
Sets the maximum current for the charging network, usually MCB rated current.
Defines the minimum current per charger, typically 6A to 10A.
Specifies the maximum current for the electrical installation, based on the mains circuit breaker.
Steps to configure the Commander via its touchscreen interface.
Steps to configure the Commander 2 via its touchscreen interface.
To Next Page
