Safety
FX66, FX85, FX110, FX140
PTO Skidding Winch
Safety
10
• Perform the Pre-start Checks procedure before starting
work (see Pre-Operation Checks on page 18).
• Replace any hydraulic hose immediately that shows signs
of swelling, wear, leaks or damage before it bursts.
• Do not bend or strike high-pressure lines, tubes or hoses,
or reinstall them in a bent or damaged condition.
• Check to make sure hydraulic hoses are not worn or
damaged, and are routed to avoid chafing.
• Never adjust a pressure relief valve or other pressure-
limiting device to a higher pressure than specified.
To Next Page
Loading...
