Foreword
FX66, FX85, FX110, FX140
PTO Skidding Winch
2
1. Foreword
1.1 Introduction
Congratulations on your choice of a Wallenstein PTO-Driven
Log Skidding Winch !
FX Series Winches are designed to pull those hard to reach logs,
even on steep hills or through swampland.
This manual covers the following FX Series models:
Model Features
FX66 Manual Control, Steel Winch Rope
FX85 Manual Control, Steel Winch Rope
FX85S Manual Control, Synthetic Winch Rope
FX85RS Remote Control, Synthetic Winch Rope
FX110 Manual Control, Steel Winch Rope
FX110S Manual Control, Synthetic Winch Rope
FX110RS Remote Control, Synthetic Winch Rope
FX140 Manual Control, Steel Winch Rope
FX140S Manual Control, Synthetic Winch Rope
FX140RS Remote Control, Synthetic Winch Rope
Model Configuration
FX110RS
Series Winch Pulling
Capacity (lb)
FX66 – 6,600 lb
FX85 – 8,500 lb
FX110 – 11,000 lb
FX140 – 14,000 lb
Remote
Control
(Option)
Synthetic Rope
(Option)
Safe, efficient and trouble-free operation of this Wallenstein
product requires that anyone using or maintaining the machine
reads and understands the Safety, Operation, Maintenance
information contained within this Operator's Manual.
Units of measurement in Wallenstein Equipment technical
manuals are written as:
US Customary (SI metric).
Keep this manual handy for frequent reference and to pass
on to new operators or owners. Call your Wallenstein dealer
or distributor if you need assistance, information or additional
copies of the manuals.
Wallenstein Equipment Inc. • © 2021. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
WARNING!
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Always keep this manual with the machine.
W034
www.wallensteinequipment.com
To Next Page
Loading...
