1.0 GENERAL INFORMATION
VM
2
TOR.VM.--.M.A.0518.EN Issue: A
05.18
5
1.7 Exclusion of responsibility
The valve is delivered according to the specications indicated by the Buyer in the order and the conditions
valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
valve if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, mainte-
nance etc. have not been carried out in compliance with the warnings described in this Manual, and in accord-
ance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the valve concerned is used:
- improperly;
- by unauthorized persons and/or persons not suciently trained for installation, operation and maintenance;
- with modications made to the original conguration without the Manufacturer’s permission;
- with spare parts that are not original or are not specic for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
valve.
To Next Page
Loading...
Need help?
General
