Wanbo TT - Setting; Network Configuration; Bluetooth Connection; Projector System Settings

14
Setting
The projector can be connected to internet with Wi-Fi.
① On the homepage, choose[Settings]>[Network]>[Internet Connection], choose the Wi-Fi
needed and press OK key.
② Please finish wifi connection according to screen prompts.
1.Network
① Open on the homepage [Settings]>[Bluetooth]>[Bluetooth Connection], choose the Bluetooth
needed and press OK key.
② Follow the on-screen instructions to complete the Bluetooth connection.
Choose [Settings] on the homepage
2. Bluetooth connection
3.Projector
OSD language Select an on-screen display language
Set up
Set the time
automatically
Enable / disable automatic date and time
Manually set date
Manually set time
Select time zone
Select 24-hour format or 12-hour format
Select the Image/Timer of Screensaver
Select the time of Sleep timer
Select the time of Auto sleep
Upgrade system via USB drive APK
Online upgrade system
Reset the projector to factory settings
Time setup
Date
Time
Region
Use 24 -hour format
Screensaver
Sleep timer
Auto sleep
USB auto upgraded
Internet update check
Reset default