Instruction Handbook KL
Chapter 1
BA KL V11 en 10/2014 page 1-2
1.3 Other applicable documentation
Observe following added documents:
Technical data, performance- and operation limits, application conditions
Dimension sheet of pump with fixing points
Exploded view with parts list
Special design or incomplete Machine
Operation of pump in an explosive area
Drive unit documentations
Instruction handbook for Drive unit
Documentation of Accessories
Instruction handbook for accessories
Declaration of decontamination
1.4 Safety instructions for operation, maintenance, inspection and assembly work
During operation, pump and drive unit may have rotating or movable parts as
well pressurised parts and possible hot surfaces!
Possible dangerous situation: Severe or fatal injuries!
Prior to carrying out any work on the machine, this must be shut down.
Switch the drive unit into a voltage-free condition and secure against any unauthorized
and accidental restart.
During and after operation pumps have hot surfaces (may be the case)
Before opening up the pump, ensure that the plant has been depressurised!
When opening up the pump, comply with all regulations concerning the flow medium.
Refit all safety devices before restarting the pump.
When restarting the machine, follow the instructions and safety notes contained in
the chapter “Start-up”.
The pump or parts thereof may fall or tip over.
Possible dangerous situation: Severe or fatal injuries!
The pump or parts of it can be very heavy and must be moved with a suitable lifting
device.
To Next Page
Loading...
