Need help?Do you have a question about the wanscam M-Jpeg Series and is the answer not in the manual?
General| Wireless Standard | IEEE 802.11b/g/n |
|---|---|
| Wireless Security | WEP, WPA, WPA2 |
| Video Compression | M-JPEG |
| Pan/Tilt | No |
| Operating Temperature | -10°C to 50°C |
| Image Sensor | 1/4" CMOS |
| Lens | 3.6mm |
| Night Vision Distance | Up to 10m |
| Ethernet | 10/100Mbps |
| Supported Protocols | TCP/IP, HTTP, SMTP, FTP, DHCP, DDNS, UPnP, NTP |
| Power Supply | DC 5V |
| Interface | RJ45 |
| Resolution | 640x480 |
Guidance on safe usage, power, and handling of the IP camera to prevent hazards.
Step-by-step guide for physically setting up the IP camera, including antenna and connections.
Details on using the search tool to find and configure the IP camera's network settings.
Process for accessing the camera's interface via browser, including default credentials.
Details on configuring Dynamic DNS services for remote access to the camera.
Instructions on setting up port forwarding in routers for external camera access.
To Next Page
