Wansview K3 - PC Client Software Operations; Adding Cameras to PC Client

3. PC Client Software
3.1 Add Camera
3.1.1 Add camera in Lan
1) Tap to add camera
2) Search the camera in Lan, DID number will be searched if use DID(P2P) to search, while
Search IP will get IP Address
3) Click the searched camera, and the camera information will be filled automatically.
4) Input the camera’s password (default is 123456).
5) Hit “Add”.
6) “Save Success” will appear, click “OK” to close the dialog.
www.wansview.com 29