EasyManua.ls Logo

Wansview NCB-541W - Centralization Control; IPC Monitor Software; FAQ; Power Adapter Issues

Wansview NCB-541W
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
http://www.wansview.com
and reboot.
5.4.5 User browsing Log
After enter the log interface, you could view who and when the device is visited.
Figure 30
6 Centralization Control
Figure 31
IPCMonitor is a free software offered by factory, several devices on LAN and WAN can
be browsed at the same time. The software also supports snap, video record, alarm and
so on. The below Figure 31 is the interface.
For more information, pls. refer to the <<IPCMonitor User Manual>> in CD.
7 FAQ
1) Unmatched power adapter will damage the equipment or power adapter
When plug in the power adapter, please check carefully the voltage, it should be 5V
21