Wansview Q3S - Page 27

www.wansview.com
27
Network > DDNS seng
The user can access the camera
via DDNS domain name provided
by the manufacturer for free or a
third party domain name. Port
mapping is required while using
domain name to access. The third
party domain name supports
3322.org/dyndns.org/No-iP.com.
Network > RTSP seng
Network > Onvif seng
The user can set the RTSP port aer
entering RTSP Seng bar. In
addion, the RTSP Authencaon
funcon can be closed. Default
value of RTSP port is: 554 Selecon
range: 554-65535
Some general RTSP streaming
media soware can be adopted to
access video on the device, such as
VLC. Access links are as shown
below:
The first bit stream: rtsp://user:
password @IP:rtsp port /live/ch0
The second bit stream: rtsp://user:
password @IP:rtsp port /live/ ch1
The third bit stream: rtsp://user:
password @IP:rtsp port /live/ ch2
Onvif is a global standard for the
interface of IP-based security
products. The ONVIF protocol
ensures interoperability between
products regardless of
manufacturer, allowing you to
integrate your IP camera as a
generic ONVIF camera into exisng
security systems.
Enter Onvif Seng. The user can
start up and calibrate Onvif
funcons. The default seng for
Onvif calibraon is on.
Note:NVR devices of some
manufacturers do not support
camera access with Onvif
calibraon. Our device supports
Onvif versions 2.5 and below.