15
• In repetitive batch-processing applications, frequent
cleaning of the container will prolong the life of the blade
assembly. In no case should actual running time between
cleanings exceed one-half hour.
• Do not use container to store processed foods or
beverages.
TO WASH AND RINSE CONTAINER
1. REMOVE CONTAINER FROM MOTOR BASE.
Remove lid. Rinse container interior and lid under
running water. Add washing solution to container.
Scrub and ush out the container interior and lid to
dislodge and remove as much food residue as
possible. Empty container.
2. Wipe down exterior of container with a soft cloth or
sponge dampened with washing solution. Wash lid
and lid insert in fresh washing solution. Fill container
one-quarter full with fresh washing solution, cover
(with lid only), place on motor base and run on HI
speed for two (2) minutes. Empty container.
3. Repeat step 2 using clean rinse water in place of
washing solution.
SOLUTION PRODUCT DILUTION IN WATER TEMPERATURE
Washing International
Products
Corporation LF2100
Liquid Low-Foam
Cleaner
1%–2%: 1¼ – 2¾
ounce/gallon (lower
dilution of 1% for normal
cleaning and up to 2% for
more stubborn soils)
Room
Temperature
Rinsing Plain Water Warm – 95˚F (35˚C)
Sanitizing Clorox
®
Regular Bleach
(8.25% Hypochlorite
Concentration)
2 teaspoons/gallon
(Alternately, a bleach
with 5.25% Hypochlorite
Concentration can be
used at dilution of
3 teaspoons/gallon)
To Next Page
Loading...
Need help?
General
