Waring CB15 SERIES User Manual

49
le remplacer immédiatement ; ne pas l'utiliser tel quel. Ne
pas trop remplir le récipient ; sa capacité maximale est
de 4 litres.
DÉSASSEMBLAGE :
1. Vérier que l’appareil est éteint et que le couvercle a
refroidi.
2. Retirer le récipient du socle.
3. Libérer les pinces de verrouillage du récipient et retirer le
couvercle.
4. En tenant la coupelle d’évaporation, tourner le couvercle
pour liquides chauds dans le sens des aiguilles d'une
montre jusqu'à ce que les pattes de verrouillage se
dégagent, puis soulever le couvercle pour liquides chaud
pour le retirer de la coupelle d’évaporation.
Attention – Le couvercle pour liquides chauds peut
contenir du liquide chaud après utilisation. Le laisser
refroidir et le manipuler avec précaution lors du
désassemblage.
ENTRETIEN
Bloc-moteur : Ne pas le laver à pression.
Le moteur à roulement à billes n'a pas besoin d'être lubrié
ni graissé. Une lubrication à vie permet un fonctionnement
optimal.
COUVERCLE
Joint d'étanchéité
Pattes de verrouillage
COUPELLE
D’ÉVAPORATION
Verrous des pattes
de verrouillage

Waring CB15 SERIES Specifications

General

Brand	Waring
Model	CB15 SERIES
Category	Blender
Language	English

Summary

Important Safeguards

General Electrical Safety Precautions

Basic safety precautions for electrical appliances, including grounding and avoiding liquids.

Operational Safety Guidelines

Warnings about moving parts, sharp blades, hot liquids, and proper operation procedures.

Specific Usage Warnings

Precautions regarding outdoor use, cord placement, and use by individuals with reduced capabilities.

Product Specifications

Capacity and Electrical Rating

Defines the working capacity and electrical specifications of the blender.

Materials and Certifications

Details materials used, components, and product certifications like cETLus, NSF.

Physical and Operational Details

Provides information on height, weight, cord length, and operating cycle.

120V Grounding Instructions

Spigot Assembly

Spigot Assembly Components

Lists the parts included in the spigot assembly kit.

Spigot Assembly Procedure

Provides step-by-step instructions for assembling the spigot.

Blender Operation

Initial Setup and Power On

Steps for preparing and turning on the blender, including cord connection and standby mode.

Blending Modes and Controls

Explanation of operating modes like continuous, momentary (PULSE), and the Slow Start™ feature.

Safe Handling During Operation

Instructions for safely holding the container and lid during blending.

Timer Operation (CB15T/CB15TP)

Timer-Based Blending

Instructions for using the timer function with UP/DOWN arrows for speed selection.

Post-Operation Procedures

Steps for turning off the blender, removing the container, and cleaning.

Variable Speed Operation (CB15V/CB15VP)

Variable Speed Control

Guidance on using the variable speed knob and START/STOP button for blending.

Momentary Operation and Safety

Details on using the PULSE button and ensuring safe handling during operation.

Maximizing Service Life

Lubrication and Material Reduction

Precautions regarding lubrication of bearings and reducing material amounts for viscous items.

Container Exterior Cleaning

Instructions on cleaning the container exterior to prevent liquid ingress into the bearing.

Hot Blending Instructions

Hot Material Definition and Speed

Defines hot materials and advises starting blending at the lowest speed.

Lid Gasket and Clamp Monitoring

Emphasizes constant monitoring of lid gasket and clamps for safety during hot blending.

Hot Blending Lid Instructions

Lid Assembly and Disassembly

Step-by-step instructions for assembling and disassembling the hot blending lid.

Lid Component Integrity

Highlights the importance of the gasket's condition and warns against covering openings.

Maintenance and Component Care

Motor and Container Care

Details on motor lubrication, container sterilization, and blade assembly lifespan.

Securing Container Components

Instructions on properly tightening the die-cast lock nut when reassembling the container.

Cleaning and Sanitizing Instructions

Container Cleaning and Drying

Mandates cleaning and drying the container after each use to prevent residue buildup.

Recommended Cleaning Solutions

Suggests specific detergents and sanitizing solutions for effective cleaning.

Washing and Rinsing Procedures

Detailed steps for washing and rinsing the container and lid.

Sanitizing and Drying Procedures

Instructions for sanitizing and drying the container and motor base.

Warranty Information

Limited Three-Year Motor Warranty

Details the warranty coverage for the motor and the blender's parts.

Warranty Exclusions and Limitations

Outlines conditions that void the warranty, such as misuse or DC power usage.

Service and Support

Contacting Waring Service Center

Provides contact information for service, repairs, and replacement parts.

Biologically Active Material Returns

Instructions for sterilizing and identifying items returned for service involving biologically active materials.