What to do if my Waring PRO JEX450 Juicer machine will not work when switched on?
If your Waring Juicer doesn't work when switched on, ensure it's properly plugged into a functioning power source. Check that all parts are correctly assembled. Press the red reset button located on the bottom of the unit. Also, inspect your home's circuit breaker or fuse panel to confirm they are active.
What to do if juice leaks between the rim of the Waring PRO JEX450 Juicer cover and the filter bowl?
If juice leaks between the rim of the juicer cover and the filter bowl, try juicing at a slower pace by gently pushing the food pusher down. Also, ensure the unit is thoroughly clean before each use.
Why does the motor appear to stall when juicing with my Waring PRO JEX450 Juicer?
The motor may appear to stall when juicing if wet pulp builds up under the cover due to vigorous juicing. Try juicing at a slower pace by pushing the food pusher down more slowly.
What to do if filter bowl juice sprays out from spout of my Waring PRO JEX450?
If juice sprays out from the spout of your Waring Juicer's filter bowl, try juicing more slowly by pushing the food pusher down gently. Also, check that the juice cup is correctly positioned.
What to do if there is excess pulp building up in the filter basket of my Waring PRO JEX450?
If excess pulp builds up in the filter basket, stop the juicing process. Remove the juicer cover and scrape off the accumulated pulp. Reassemble the juicer and continue juicing. Try alternating between soft and hard fruits and vegetables.
What to do if the pulp is too wet and insufficient when using my Waring Juicer?
If the pulp is too wet and insufficient, change the speed to low or high and try a slower juicing action. Remove the mesh filter basket and clean the mesh walls with a fine brush using a solution of 70% water and 30% bleach. This will remove excess fiber buildup (from fruits or vegetables) that could be inhibiting juice flow.
Guidelines for using extension cords safely with the juicer.
Explains the function of the thermal protector and how to restart the motor.
Suggestions for utilizing the pulp generated during the juicing process.
To Next Page
General