EasyManua.ls Logo

Waring SCM100 Series - Power Cord Instructions; Polarized Plug and Voltage Requirements; Before First Use; Unpacking and Initial Cleaning

Waring SCM100 Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
CONTENTS
Important Safeguards ................................................................. 2
Power Cord Instructions ............................................................... 3
Before First Use ............................................................................ 3
Operation ..................................................................................3-4
Helpful Hints ................................................................................ 4
Parts ............................................................................................. 5
Safety Features ............................................................................ 5
Cleaning and Maintenance ........................................................... 6
Recipes ....................................................................................6-9
POWER CORD INSTRUCTIONS
The Waring Pro
TM
Snow Cone Maker has a polarized plug (one
blade is wider than the other). To reduce the risk of electric shock,
this plug will t in a polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do not modify the plug in any way.
This appliance is for 120 volts only and should not be used with
a converter.
BEFORE FIRST USE
1. Carefully unpack your Waring Pro
TM
Snow Cone Maker.
Remove plastic bags from all parts of the unit. Be sure that
the unit has not been damaged during transport. Do not
leave plastic bags around children.
2. Rinse the snow bin with water and a non-abrasive cleanser,
and then dry thoroughly.
OPERATION
1. Place unit on a at, sturdy surface where it will not be
knocked over.
2. Check ice chute for presence of foreign objects before
plugging in. WARNING: DO NOT TOUCH BLADE.
3. Insert the removable snow bin onto the main housing. An
interlock safety feature will prevent the unit from turning on
if not properly in place.
4. Be sure that the toggle switch is set to the Off position and
plug into an outlet.

Related product manuals