7
21
3
4
WHAT’S IN THE BOX
Instruction Manual
Wall Fire Suite
Remote
Log set
Fixing/Mounting Screws
1. Heater
2. Surround
3. Log Set
4. Remote Control
BEFORE YOUR FIRST USE:
1. Remove your appliance from the packaging.
2. Install your appliance in accordance with the installation & safety instructions.
3. Your appliance is now ready for normal use.
Dispose of the packaging in a responsible manner.
WARNING: This product must be installed correctly, failure to do so may result in injury, electric
shock to the user or damage to your product and your Property.
TOOLS NEEDED (not supplied)
1. 2mm pilot drill bit & 8mm drill bit (the 8mm drill bit may need to be a masonry bit)
2. Philips screw driver
3. Power drill
2mm
8mm
To Next Page
Loading...
