WarmPool DC55 - Page 10

~ 10 ~
Installation and operation manual DC
Main
symbols
Name
Function
Defrost symbol
Displayed when the unit is in the defrosting process.
Compressor symbol
Displayed when the compressor is running.
Water pump symbol
Displayed when the heat pump detects water flowing
through the heat pump and that the water circulation pump
is operating correctly.
Fan symbol
Displayed when the fan is running.
Silent mode
Displayed only when this mode is active or programming
is active. Available only in our Inverter ranges.
Schedule
Programming
Displayed when a time schedule is being recorded.
Water outlet symbol
Displays the water outlet temperature.
Water inlet symbol
Displays the water inlet temperature.
Lock symbol
Displayed when the keypad is locked.
Error symbol
In the event of a failure of the unit, an error code will be
displayed on the screen.
Wireless signal
symbol
When the device is connected to the WIFI module, this icon
appears on the display and the number of bars depends on
the WIFI signal strength.
Degrees Celsius
Symbol
Displays temperatures in degrees Celsius.
Degrees Fahrenheit
Symbol
Displays temperatures in degrees Fahrenheit.
To change the temperature display, go to the operating
parameters
Setting symbol
Used to set a parameter.