Warner RF FMT3.0 User Manual

Contact:lanyue Email:lanyue@cantonmade.com Whatsapp:+86 13602420401
FMT3.0 English Manual
The preparation：
First of all, please set up the antenna and connect to the transmitter RF OUT port
with RF cable。If you need to testing equipment indicators, please pick up the attenuator
is greater than 1 kw，attenuation more than 50db。Connect the power cable then Access
to the XLR audio cable. There are “L” and “R” Channels。Turn on the “Power” button.
Equipment start after 5 seconds.

Warner RF FMT3.0 Specifications

General

Brand	Warner RF
Model	FMT3.0
Category	Transmitter
Language	English

Summary

The Preparation

Transmitter Operating Interface

Boot Logo and System Load

Details the initial boot process and system loading sequence.

Main Screen and Settings Access

Describes the main display and how to access system settings.

Frequency and Antenna Matching

Modulation Mode Menu

System Settings Menu

Time Calibration

Procedure for setting and calibrating the system's current time.

Password Management

Instructions for changing user passwords and managing system access.

Transmitter Operation Exception Information

VSWR High Alert

Explanation of VSWR high condition and required actions.

Overheat Alert

Details on transmitter overheating and environmental precautions.

Transmitter Troubleshooting Tips