Warren Controls 313 User Manual

INSTALLATION, OPERATION
& MAINTENANCE INSTRUCTIONS
313 OVERFLOW TRAP
LEVEL CONTROLS 313 IOM
TABLE OF CONTENTS
Overview .................................................Cover
General Information ............................Cover
Installation .......................................................4
Operation .........................................................4
Maintenance ...................................................4
Float Ball Level Test Procedure .................5
Float Ball Level Adjustment Procedure..6
Information Present on 313's .................... 7
Overflow Trap Specifications.....................8
Overhaul / Parts Kits ........................... 9 & 10
Drawings..................................................11-14
This document covers the installation, operation and maintenance
of 313 Overflow Traps presented in the “Level Controls and
Accessories”, Product Specification.
The instructions given herein cover generally the operation and
maintenance of subject equipment. Should any questions arise
which may not be answered specifically by these instructions,
they should be referred to Warren Controls Inc. for further detailed
information and technical assistance. This manual cannot possibly
cover every situation connected with the operation, adjustment,
inspection, test, overhaul and maintenance of the equipment
furnished. Every effort is made to prepare the text of this manual
so that engineering and design data is transformed into the most
easily understood wording. Warren Controls Inc., in furnishing this
equipment and this manual, must presume that the operation and
maintenance personnel assigned thereto have sufficient technical
knowledge and experience to apply sound safety and operational
PRODUCT OVERVIEW
practices which may not be covered herein. In applications where
Warren Controls Inc. furnished equipment is to be integrated with a
process or other machinery, these instructions should be thoroughly
reviewed to determine the proper integration of the equipment into
the overall plant operational procedures. Warren Controls does not
assume responsibility for the selection, use, or maintenance of any
product. Responsibility for proper selection, use, and maintenance
of any Warren Controls product remains solely with the purchaser
and end-user.
GENERAL INFORMATION
313_IOM_RevC_0418

Warren Controls 313 Specifications

General

Brand	Warren Controls
Model	313
Category	Controller
Language	English

Summary

General Information

Installation, Operation, and Maintenance

Installation

Covers installation requirements and guidelines for the 313 Overflow Trap.

Operation

Explains the working principles and operational aspects of the 313 Overflow Trap.

Maintenance

Details the maintenance procedures and recommendations for the 313 Overflow Trap.

Float Ball Level Procedures

Float Ball Level Test Procedure

Step-by-step guide for testing the float ball level in the overflow trap.

Float Ball Level Adjustment Procedure

Procedure for adjusting the float ball level for optimal performance.

Overhaul and Parts Information

Overhaul

Information regarding rebuilding or repairing the overflow trap.

313 Overflow Trap Parts / Overhaul

Lists parts that can fail and provides general overhaul information.

313 Overflow Trap Parts Kits

Details available parts kits for the 313 Overflow Trap and their corresponding part numbers.

Specifications and Identification

Information Present on 313 Overflow Trap

Details on labels and markings found on the 313 Overflow Trap.

313 Overflow Trap Specifications

Technical specifications, ratings, and capacities of the 313 Overflow Trap.

Drawings and Diagrams

Drawing 03130611101-1

Detailed assembly drawing of the 313 Overflow Trap valve body.

Drawing 03130611101-2

Dimensional drawing of the 313 Overflow Trap with size specifications.

Drawing 03130611101-3

Diagrams illustrating float ball level setup procedures.

Drawing 03130614111

Diagram for fabricating a float ball level test setup fixture.