Need help?Do you have a question about the Warwick Corvette Standard and is the answer not in the manual?
General| Neck Material | Ovangkol |
|---|---|
| Fingerboard Material | Wenge |
| Number of Frets | 24 |
| Made in | Germany |
| Body Material | Ash |
| Scale Length | 34 inches |
| Bridge | Warwick 2-piece bridge |
| Hardware | Chrome |
| Controls | Volume, Balance |
Details on accessing and adjusting the truss rod via the easy-access plate on the headstock.
Controls and specifications for the Warwick Corvette Standard passive bass model.
Controls and specifications for Warwick Corvette Standard Active and ProLine basses with active preamp.
Controls and specifications for the Warwick Corvette $$ bass featuring an active MEC 2-way circuit.
Controls and specifications for the Warwick FNA Jazzman bass with active MEC or Seymour Duncan preamp.
Controls and specifications for the Warwick Thumb Bass, equipped with an onboard active preamp.
Controls and specifications for the Warwick Thumb Bolt-on bass with an active preamp.
Controls and specifications for the Warwick Streamer CT bass with an onboard active preamp.
Controls and specifications for the Warwick Streamer LX BN bass with an onboard active preamp.
Controls and specifications for the Warwick Streamer Jazzman with active MEC or Seymour Duncan preamp.
Comprehensive guide on adjusting the truss rod for neck relief, including tool requirements and procedures.
Instructions for setting the string height at the nut using the Just-A-Nut II for optimal action.
Guide to fine-tuning individual string heights and overall bridge height for playability and tone.
Procedure for setting string intonation using a tuner to match harmonic and fretted notes at the 12th fret.
To Next Page
