Wasco LS 1003 E - Child Lock and Programme Control

28/EN
Washing Machine / User’s Manual
4.12 Child Lock
Usechildlockfunctiontopreventchildrenfromtampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmes and the selected temperature, speed and
auxiliaryfunctions.
C
Evenifanotherprogrammeisselectedwiththe
ProgrammeSelectionknobwhiletheChildLockis
active,previouslyselectedprogrammewillcontinue
running.
C
When the Child Lock is active and the machine is
running,youcanswitchthemachinetoPausemode
withoutdeactivatingtheChildLockbyturningthe
ProgrammeSelectionknobtoOn/Offposition.When
youturntheProgrammeSelectionknobafterwards,the
programmewillresu
To activate the Child Lock:
Pressandhold1stand2ndAuxiliaryFunctionbuttonsfor
3seconds.Thelightsonthe1stand2ndAuxiliaryFunction
buttonswillflashwhileyoukeepthebuttonspressedfor3
seconds.
To deactivate the Child Lock:
Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3
secondswhileanyprogrammeisrunning.Thelightsonthe
1stand2ndAuxiliaryFunctionbuttonswillflashwhileyou
keep the buttons pressed for 3 seconds.
C
In addition to the method above, to deactivate the Child
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
Whenthepowerisrestoredafterapowerfailureorafter
your machine is unplugged and plugged in again, the
ChildLockwillnotbedeactivatedwhenthemachine
resumes operating.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
lightofthecompletedstepwillturnoff.
Youcanchangetheauxiliaryfunctions,speedand
temperaturesettingswithoutstoppingtheprogrammeflow
whiletheprogrammeisrunning.Todothis,thechange
you are going to make must be in a step after the running
programme step. If the change is not compatible, relevant
lightswillflashfor3times.
C
If the machine does not pass to the spinning step,
RinseHoldfunctionmightbeactiveortheautomatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.14 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
Loadingdoorlightwillstartflashingwhenthemachine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminatessteadilywithin1-2minutesandtheloadingdoor
can be opened.
If the level is unsuitable, Loading Door light turns off and the
loading door cannot be opened. If you are obliged to open
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see“Cancelingthe
programme”.
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pausemodewhileaprogrammeisrunning.Thelightof
thestepwhichthemachineisinstartsflashinginthe
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
maycanceloractivatetheauxiliaryfunctions;see,“Auxiliary
function selection”.
You may also change the speed and temperature settings;
see,“Spinspeedselection”and“Temperatureselection”.
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
4.15 Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pausemode.Theprogrammefollow-uplightoftherelevant
stepduringwhichthemachinewasswitchedintothepause
modewillflash.WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,
temperatureandspeedsettingsifnecessary.PressStart/
Pausebuttontostartthemachine.
4.16 Canceling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecanceled.End/Cancellightwillflashcontinuouslyto
notify that the programme has been canceled.
Yourmachinewillendtheprogrammewhenyouturnthe
ProgrammeSelectionknob;however,itdoesnotdrainthe
waterinside.Whenyouselectandstartanewprogramme,
thenewlyselectedprogrammewillstartdependingonthe
stepthepreviousprogrammewascanceledin.Forexample,
itmaytakeinadditionalwaterorcontinuetowashwiththe
waterinside.
C
Dependingonthestepwheretheprogrammewas
canceled in, you may have to put detergent and softener
againfortheprogrammeyouhaveselectedanew.