Wasp Barcode Technologies WWS550i User Manual

Wasp Barcode Technologies: Bluetooth pairing a WWS550i barcode scanner on Windows XP Page 1 of 2
Before attempting to pair your device, please read
through the following instructions, paying
particular attention to Step 9.
1. Click Start, Run, then type bthprops.cpl in
the box, then click OK (or press Enter key).
2. Click the Add button.
3. Check the box “My device is set up and ready to
be found”, then click the Next button.
4. Click the Wasp Barcode Bluetooth Keyboard,
then click the Next button.
5. Click “Choose a passkey for me” but don’t click
Next yet.
6. Scan Factory Default
7. Scan Set Connection
8. Scan Start Pin
9. On the PC, click Next. A connection code will
appear. In the next step, you will enter (by
scanning barcodes) the code that appears on your
screen. Do not enter the code from the example
below since your code will be different. Note that
Windows gives you only a short time to enter the
code, so maintain a brisk pace when scanning the
codes from the next page.

Wasp Barcode Technologies WWS550i Specifications

General

Type	Wireless Barcode Scanner
Connectivity	Bluetooth
Scanning Technology	Laser
Scan Rate	100 scans per second
Power Source	Rechargeable Lithium-ion battery
Decode Capability	1D and 2D
Interface	USB
Supported Barcode Types	UPC, EAN, Code 39, Code 128
Operating Temperature	32° to 122° F (0° to 50° C)
Storage Temperature	-4° to 158° F (-20° to 70° C)
Humidity	5% to 95% non-condensing

Summary

PC Configuration for Bluetooth Scanner Pairing

Access Bluetooth Settings

Open the Bluetooth devices settings by running 'bthprops.cpl' in Windows XP.

Add Bluetooth Device Wizard

Initiate the pairing process by clicking 'Add' and confirming device discoverability.

Select Scanner and Choose Passkey

Select the scanner, choose a passkey method, and prepare for connection.

Display Connection Code

Click 'Next' to display a unique connection code on the PC screen for scanner entry.

Scanner Pairing and Connection

Scan Pairing Barcodes

Scan specific barcodes for factory default, connection, and start pin as prompted.

Enter Connection Code via Barcodes

Scan barcodes corresponding to the digits of the connection code displayed on the PC.

Finalize and Test Connection

Complete the wizard, and test the connection by scanning data into an application.