Page 11
How to strip a wire using a utility knife
1. Hold the utility knife so it
gently rests on the wire.
2. Roll the wire under the
blade to score the
insulation.
Note: Use protective gear when using a utility knife.
0.6
22
20
18
16
14
12
10
AWG
0.8
1.0
1.3
1.6
2.0
2.6
MM
4. Squeeze the stripping
tool’s handles gently.
5. Spin the tool around the
wire to ensure you’ve cut
the insulation.
6. Slide the stripper off
the wire to pull off the
insulation.
3. Place the tip of the wire
in the appropriate notch.
To Next Page
Loading...