Need help?Do you have a question about the WATANABE A5000 Series and is the answer not in the manual?
General| Brand | WATANABE |
|---|---|
| Model | A5000 Series |
| Category | Measuring Instruments |
| Language | English |
Lists model codes and specifications for product ordering.
Details unit types and necessary accessories for the A5000 series.
Instructions for inspecting the product for damage before operation.
Describes the procedure for assembling the A5000 series panel meter units.
Details how to mount the A5000 series panel meter onto a control panel.
Explains how to connect the power supply to the A5000 series panel meter.
Details connecting input signals to various units of the A5000 series.
Explains how to connect external control signals to the A5000 series.
Details how to connect comparison output signals.
Explains how to connect analog output signals.
Details connecting serial communication interfaces (RS-232C, RS-485).
Describes the components and functions of the multi-display unit.
Describes the components and functions of the single-display unit.
Classifies A5000 series parameters into logical groups for operational setup.
Provides a comprehensive list of parameters and their default settings.
Outlines the basic procedure for setting A5000 series parameters.
Manages settings for measurement ranges, hold functions, and communication.
Details the method for setting comparator data (judgment values, hysteresis).
Configures display and analog output scaling based on input signals.
Sets up linearization function parameters to correct input/indication relationships.
Details processes for calibrating the unit using actual load or equivalent methods.
Allows arbitrary shifting of the display without altering input signal gradient.
Enables display of max, min, and input values in monitor mode.
Temporarily retains and displays the current measured value.
Zeros the indication at an arbitrary timing, showing the change amount.
Retains and outputs the maximum, minimum, or peak-valley values.
Sets judgment values for relay contact output based on measured values.
Outputs analog signals for indicated values, supporting various ranges.
Describes the functionality of the RS-485 communication interface.
Describes the functionality of the RS-232C communication interface.
Details electrical specifications for various input signal types.
Lists general specifications common to all A5000 series units.
Details specifications for output functions like comparison, analog, and communication.
Provides physical dimensions and drawings of the A5000 series unit.
Details terminal assignments and connection methods for communication ports.
Lists user-selectable parameters for communication functions.
Details transmission and reception formats for RS-485 communication.
Lists and describes various communication commands for controlling the unit.
Outlines the warranty period and terms for the A5000 series.
Provides information on how to contact for product support and service.
To Next Page
