3/72
9.2. Hold Function…………………………………………………..…………55
9.3. Digital Zero Function……………………………………………..……..55
9.4. Peak Hold Function………………………………………..…………….56
10. Output Functions……………………………………………..……………..56
10.1. Comparison Output Function………………………..……………….56
10.2. Analog Output Function………………………………..……………..56
10.3. RS-485 Interface Function…………………………………..………..56
10.4. RS-232C Interface Function………………………………..…………56
11. Error Messages……………………………………………………..………..57
12. Specifications and External Dimensions………………………..……….58
12.1. Input Specifications………………………………………….…………58
12.2. Common Specifications……………………………………..………….62
12.3. Output Specifications………………………………………..…………63
12.4. External Dimensions…………………………………………..……….64
13.Detailed Communications Specifications………………………..……….65
13.1. Terminal Assignments and Connection Method……………………65
13.2. Communication Function Parameters……………………………….65
13.3. RS-485 Transmission/Reception Formats………………..…………65
13.4. Communication Commands………………………………..………….67
14. Warranty and After-service……………………………………..………….72
14.1. Warranty ……………………………………………………..…………..72
14.2. After-service…………………………………………………..………….72
Safety Precautions
(1) Do not apply a voltage or current exceeding the maximum allowable
value; otherwise, it may damage the equipment.
(2)
Use a power voltage within the operation range; otherwise, it may result
in a fire, electrical shock, or malfunction.
(3) The contents of this manual are subject to change without notice.
(4)
Although the contents of this manual have been prepared with extra
care, if you have any questions, or find errors or missing information,
contact the sales agent from which you purchased the product or
.
After reading this manual thoroughly, keep it in a convenient place for
future reference.
(5)
Caution
!
To Next Page
Loading...
