Need help?Do you have a question about the WatchGas AirWatch MK1.2 and is the answer not in the manual?
Explains the device's backup power source and its charging status indicators.
Details the optional wireless module for mesh networking and communication.
Describes the role of the receiver in the wireless mesh network.
Explains how repeaters extend the range of the wireless network.
Details the optional audible and visual alarm sounder for noisy environments.
Introduces the monitoring software for real-time data and alarms.
Highlights safe applications like monitoring breathing air and other industrial uses.
Explains the meaning of the LED indicators for status and alarms.
Provides requirements and steps for physically installing the device.
Describes how to use magnetic keys to navigate menus and control the device.
Explains the procedure for powering the AirWatch on and off.
Covers device configuration, including setting Unit ID for multiple units.
Details procedures for fresh air and span calibration.
Explains how to perform a bump test to verify sensor functionality.
Describes what triggers an alarm and how the device indicates it.
Outlines maintenance tasks that the user can perform.
Details the correct procedure for safely shutting down the AirWatch.
Explains who can perform repairs and what components require professional service.
Provides guidance on the proper disposal of the device.
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Certifications | ATEX, IECEx, UL, CSA |
| Display | LCD with backlight |
| Target Gas | Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Combustible gases (LEL) |
| Sensor Type | Electrochemical |
| Measurement Range | O2: 0-30% Vol, CO: 0-500 ppm, H2S: 0-100 ppm, LEL: 0-100% LEL |
| Resolution | O2: 0.1% vol, CO: 1 ppm, H2S: 1 ppm, LEL: 1% LEL |
| Alarms | Visual, audible, and vibration alarms |
| Data Logging | Yes |
To Next Page
