Need help?Do you have a question about the WatchGas PDM+ and is the answer not in the manual?
General| Target Gas | O2, CO, H2S, LEL |
|---|---|
| Measurement Range O2 | 0-30% vol |
| Measurement Range H2S | 0-100 ppm |
| Measurement Range LEL | 0-100% LEL |
| Resolution O2 | 0.1% vol |
| Resolution CO | 1 ppm |
| Resolution LEL | 1% LEL |
| Accuracy O2 | ±0.5% vol |
| Response Time O2 | < 15 seconds |
| Response Time LEL | < 15 seconds |
| Operating Humidity | 10-95% RH (non-condensing) |
| Sensor Type | Electrochemical (O2, CO, H2S) |
| Alarm Type | Audible, Visual, Vibration |
| Ingress Protection | IP67 |
| Certifications | ATEX, IECEx, UL, CSA |
Overview of the detector's physical parts and their labels.
Explanation of the various icons and indicators shown on the device display.
Details on how the device displays gas concentrations during normal operation.
Information on cycling through different display views and data points.
Procedure for enabling alarms and setting custom gas detection thresholds.
Pre-set alarm thresholds for various gases, serving as a reference.
Procedure for calibrating the detector using ambient clean air.
Steps for calibrating the detector using a certified calibration gas cylinder.
How to check the number of days left until the next calibration is due.
Instructions on how to exit calibration mode and resume normal gas detection.
Explanation of the device's automatic self-test function and its configurable interval.
Procedure for performing a bump test to verify sensor responsiveness.
Step-by-step guide for safely replacing the gas sensor module.
Instructions for safely replacing the device's internal lithium battery.
Technical details including size, weight, operating temperature, and IP rating.
Specifics on detectable gases, measurement ranges, resolution, and article numbers.
Details on the detector's intrinsic safety certifications and conformity standards.
Information regarding electromagnetic compatibility standards and directives.
Details of the manufacturer's certification for quality management.
To Next Page
