WatchGas PDM+ - Certificates; Intrinsic Safety; Compliance; Manufacturing Approval

www.watchgas.eu
13
Detection
User Manual Single Sustainable Gas Detector PDM+
D e t e c t i on
9. Certificates
Intrinsic Safety: The detector is in conformity of the following standards
IECEx: Ex ia IIC T4 Ga
IECEx IECEx KTL 19.0019X
ATEX: 2198 II 1 G Ex ia IIC T4 Ga IP67
KRH 19 ATEX 1022X
Directive 2014/34/EU
KCS: Ex ia IIC T4
KTL 19-KA2BO-0491X
INMETRO Ex ia IIC T4 Ga
BRA-19-GE-0022X
Compliance: Electromagnetic Compatibility Directive 2014/30/EU
Standards:
The electrical apparatus and any acceptable variations to it specied in the schedule of this certicate
and the identied documents, was found to comply with the following standards:
• IEC 60079-0: 2011 Ed. 6
• IEC 60079-11: 2011 Ed 6
• IEC 60079-26 : 2014-10 Ed 3
• EN 60079-0: 2012+A11:2013
• EN 60079-11: 2012
Manufacturing Approval:
The detector manufacturer is certied compliant with ISO 9001:2000 provisions
51 2 3 4
1. Explosion Protected
2. Protection Concept
3. Gas Group
4. Temperature Classication
5. Equipment Protection level