Watchguard AP130 User Manual

WatchGuard AP130 Hardware Guide
The WatchGuard AP130 is a 2x2 802.11ax dual radio access point that supports up to 574 Mbps data rate
on 2.4 GHz band and 1200 Mbps on 5 GHz band.
The AP130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or
remote workers.
Access Point Management
You can manage the AP130 with WatchGuard Cloud. WatchGuard Cloud delivers a simplified platform for
Wi-Fi management to easily deploy, configure, and report on your wireless networks.
For more information on how to set up your access point with WatchGuard Cloud, see
watchguard.com/start.
About Your Hardware
Hardware Specifications

Watchguard AP130 Specifications

General

Wi-Fi Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Power over Ethernet	802.3af PoE
Security	WPA, WPA2, WPA3
Antenna	2 x 2 internal antennas
Ethernet Ports	1 x Gigabit Ethernet
Operating Temperature	0°C to 40°C
Mounting	Ceiling, Wall

Summary

Hardware Specifications

Hardware Description and Indicators

Panel Connections

Details of bottom and side panel ports and slots, including reset and Kensington lock.

Device Status Indicators

Explains the meaning of LED colors to indicate device operational status.

Installation and Connectivity

Mounting Methods

Covers ceiling, wall, and free-standing bracket installation procedures.

Powering the Access Point

Instructions for connecting power via PoE or an optional adapter.

Environmental and Safety Information

Environmental Requirements

Specifies operating temperature and humidity limits for the access point.

Safety and Compliance

Covers essential safety warnings, power adapter requirements, and regulatory compliance like FCC.